Running in 1997 bedroom slide an extra 2 inches to replace bedroom slide seal - Printable Version

+- Newell Gurus (https://newellgurus.com)
+-- Forum: Documentation (https://newellgurus.com/forumdisplay.php?fid=13)
+--- Forum: Slides (https://newellgurus.com/forumdisplay.php?fid=72)
+--- Thread: Running in 1997 bedroom slide an extra 2 inches to replace bedroom slide seal (/showthread.php?tid=4373)

---

Running in 1997 bedroom slide an extra 2 inches to replace bedroom slide seal - cfree3 - 07-16-2018

Has anyone had to do this? We need to pull in the slide an extra 2 inches to replace the seal. Anyone that has done that to give direction on what to unhook the ram stop to bring it in further? Call 920-716-7248.

---

RE: Running in 1997 bedroom slide an extra 2 inches to replace bedroom slide seal - Land Yacht - 07-16-2018

Newell did mine. You may be able to call and get directions. Mark was the tech.

---

RE: Running in 1997 bedroom slide an extra 2 inches to replace bedroom slide seal - encantotom - 07-16-2018

just a comment. only the raised floor slides can be pulled in to change the seals. (hwh). the salon or any other flat floor slides need to be taken out of the coach a few inches to change the seal. (hwh)

tom

---

RE: Running in 1997 bedroom slide an extra 2 inches to replace bedroom slide seal - cfree3 - 07-17-2018

(07-16-2018, 08:22 PM)Land Yacht Wrote:  Newell did mine. You may be able to call and get directions. Mark was the tech.

Thanks. We talked to Mark and he said it had been so long that he didn’t remember specifically which bolts he took out. We almost have it in enough right now to do the job. We just took some bolts out around where he thought they were.

---