Steering pump -
BusNit - 12-13-2023
Does anyone know what make this pump is? I need a gasket for the pump to engine mount and the engine mount to engine block. I have a leak that's been there since I bought it. Thought tightening down the bolts would have helped last year but that's not the case. Not sure the gasket part numbers.
RE: Steering pump -
Jack Houpe - 12-14-2023
Any name plate on it?
RE: Steering pump -
BusNit - 12-14-2023
Nothing I can see
RE: Steering pump -
Guy - 12-14-2023
Photo number 2 has a casting stamp that starts out 89_ ?16 . You might try using Google Lens app. I have had good luck on old electronic components for id
RE: Steering pump -
Richard - 12-14-2023
Ask Clifford on the bus conversion forum.
RE: Steering pump -
BusNit - 12-14-2023
Thanks Richard. I hardly ever post there and I need to.
RE: Steering pump -
House Divided - 12-14-2023
Simon, I have literature from the previous owner dating back to 1998 saying that pump is a Commercial Motor/ Intertec. It is generically labeled an M30 hydraulic motor - the specific part number is 312-9218-034. Apparently the shaft is a bit special - it's part number is 312-1500-001.
The literature came from Air and Hydraulic Components,Inc in Tulsa OK.
I can't make out specific numbers on my pump so I can't verify any of this info.
And as always, your mileage may vary.
David