HWH HYDRAULIC LOCK PIN - Printable Version

+- Newell Gurus (https://newellgurus.com)
+-- Forum: Documentation (https://newellgurus.com/forumdisplay.php?fid=13)
+--- Forum: Slides (https://newellgurus.com/forumdisplay.php?fid=72)
+--- Thread: HWH HYDRAULIC LOCK PIN (/showthread.php?tid=8076)

---

HWH HYDRAULIC LOCK PIN - [email protected] - 07-20-2024

Hwh hydraulic slide lock pin, leaking on bedroom slide. MODEL # AP19920 S# 2349, does anyone have a part# for rebuild seal kit. 
Thank you,
James Price
Coach 647, 500 SD

---

RE: HWH HYDRAULIC LOCK PIN - Richard - 07-20-2024

Look at third picture in first post. https://newellgurus.com/showthread.php?tid=5752

---

RE: HWH HYDRAULIC LOCK PIN - [email protected] - 07-21-2024

Richard thanks for the post, just what i needed. Richard do you have a way to test for leaks without reataching?
Thanks again,
James Price
Coach 647, 2003, SSD

---

RE: HWH HYDRAULIC LOCK PIN - Richard - 07-21-2024

You can use a portable hyd pump. You may have to cobble some adaptor fittings. https://www.harborfreight.com/4-ton-portable-hydraulic-equipment-kit-58204.html?utm_source=google&utm_medium=cpc&utm_campaign=12192885310&campaignid=12192885310&utm_content=161913026826&adsetid=161913026826&product=58204&store=&gad_source=1&gbraid=0AAAAADAHb4dQSCEk28tzfyY2njGu2hAio&gclid=CjwKCAjw4_K0BhBsEiwAfVVZ_1jCLM48w2v08cgdKtuQc294X1VKu73DHO1_R6yvPPGhUU9VS9FsxBoCIH8QAvD_BwE

The pins on mine were not scored so I didn’t bother. Of course, I activated the room a few times before I put all the covers and valence back in place.

---

RE: HWH HYDRAULIC LOCK PIN - Jack Houpe - 07-22-2024

Or bedroom slide has them but they don't work, someone prior to our ownership has taken them out of the circuit and I have not investigated what they did but the slide goes in and out.

---

RE: HWH HYDRAULIC LOCK PIN - rvguy - 07-22-2024

I have all the orings that you can replace in the lock pin. Let me know and I can send you some. Rebuilt all of mine last year. Lattitide28 has a great write up on it as Richard explained. Pretty easy job. Make sure you buy the long snap ring pliers/ The hardest part of the job is getting the snap ring off inside the block ( specially if your eyes are not that good)

---