[racerswift]

Greetings,

Base on all the reports on replacing this bar and with my coach having 240K+ miles on it...

I'm trying to figure out the correct bar for my coach.  It's 2001 #593.  Base on the drawings from the thread  

Ridewell Drawings (https://newellgurus.com/showthread.php?tid=7524) post#5  I do have the Ridewell 246003 Drive Suspension based on my plate.

It's showing item 43 "Sway bar Tpin A=27.25"  Part no: 5037046B323

I can't tell if this is the same as the meritor 5111 version?  Does this seem correct.

Anyone have another source for this part.  I tried the link from Jeff's reply in thread https://newellgurus.com/showthread.php?tid=8107&page=4  but it's showing out of stock now.  And I certainly do not want to remove this before I can get a new one.  

Thanks

Frank

[Richard]

Frank,

This is the one that was on my coach 512 https://www.meritorpartsxpress.com/webap...a/kit-5116

The difference between the two parts in Jeff's thread is the attachment method at the top of the rear differential. You will have to crawl under and take a look. If you have a tapered pin that goes into a tapered hole on the top of the diff, then you use part 5116

The 5112 part appears to mount to a stud on top of the diff.

Or post a pic of that attachment point on the diff, and we can help you figure it our.

[racerswift]

Here is a pic I found on my phone of that end I believe.

   

Is there 8 bushings per side or is that total.

[Richard]

That appears to be the tapered end.

On the bushings you have changed the topic. There are two radius rods on each side. Each rod has two bushings. So a total of 8. There are also 4 of the very same bushings in the tag suspension.

[racerswift]

Ok so that would be the same as yours then, the 5116 kit.


Thanks

Richard