04-02-2021, 05:12 PM
Here are the inverter settings I used per BB:
Magnum Remote Settings
041220
Shore Max 30A
Setup 01 – Search Watts OFF
Setup 02 – LBCO 11.7V
Setup 03 – Absorb Time 180 minutes
Setup 04 - Battery Type CC/CV
Max Amps 300A
Charge Volts 14.4V
End Charge Done Time 120 minutes
Max Time 12 hours (safety cutoff)
Recharge 13.4V (90% SOC)
Most of the time (on shore power,) the display indicates "Constant Voltage (14.3 - 14.6V) +(0-10A)" It occasionally reads "Quiet Mode 13.6V" After a period off shore power, the indication when plugged back in is Constant Current, then Constant Voltage, at a much higher current. Do you think this is keeping the lithiums at too high a voltage too much of the time?
Magnum Remote Settings
041220
Shore Max 30A
Setup 01 – Search Watts OFF
Setup 02 – LBCO 11.7V
Setup 03 – Absorb Time 180 minutes
Setup 04 - Battery Type CC/CV
Max Amps 300A
Charge Volts 14.4V
End Charge Done Time 120 minutes
Max Time 12 hours (safety cutoff)
Recharge 13.4V (90% SOC)
Most of the time (on shore power,) the display indicates "Constant Voltage (14.3 - 14.6V) +(0-10A)" It occasionally reads "Quiet Mode 13.6V" After a period off shore power, the indication when plugged back in is Constant Current, then Constant Voltage, at a much higher current. Do you think this is keeping the lithiums at too high a voltage too much of the time?
2001 #579 ("Chester's Coach")