[pairodice]

Thanks guys!
Richard: I did not remove the both limit switches - I removed the driver side limit switch itself and disconnected the wiring with the plastic plugs. I did not disconnect or remove the passenger side switch. I have since replaced the driver side limit switch so that the little ‘button’ clicks when I screwed the switch down and have reconnected the wire plugs together.
I do remember moving the solenoid T-handle on one of the solenoids but not sure which one - will check them in the morning.
I am really not sure HOW we were able to get the slide back in since it was so long ago…
Russ: that makes sense about current vs voltage - will read up on it in the morning and test the current.