09-08-2022, 06:49 PM
Dave,
What fitting is on the end of the braided hose? You may find it is a 37 degree JIC. It it is, you will have to transition from the JIC fitting to NPT. No problem, McMaster will have what you need.
The barb with clamps should be just fine if you have to use rubber fuel hose
Maybe this is what you are looking for. If you want to use the hard hose.
https://www.mcmaster.com/50915K332
https://www.mcmaster.com/50915K731
What fitting is on the end of the braided hose? You may find it is a 37 degree JIC. It it is, you will have to transition from the JIC fitting to NPT. No problem, McMaster will have what you need.
The barb with clamps should be just fine if you have to use rubber fuel hose
Maybe this is what you are looking for. If you want to use the hard hose.
https://www.mcmaster.com/50915K332
https://www.mcmaster.com/50915K731
Richard and Rhonda Entrekin
99 Newell, 512
Maverick Hybrid Toad
Inverness, FL (when we're home
)