[encantotom]

richard, i think we have talked about this. when tony had his coach here and we did the slide seal, we discovered the spacers on some of the bottom brackets holding the slide at the front had come out. and we think it caused the slide to be lower and then roll out his slide seal. with some fun, we were able to pry the slide up and put those spacers back in that raised it up a little. would putting thicker spacers in the back part of the slide push the top out to help with this? it has been too long since we did it so i dont remember how it was all set up.

hopefully jack can see something with it all apart now

tom