[BusNit]

The bar looks similar to all drawings. I ordered one on FindItParts for $264 with tax shipped. Should be here Thursday. I removed the two frame side bolts. I do not have a 1-3/4 socket so that one is coming from Amazon on Wednesday. Impact grade. I used a Milwaukee 1/2" drive impact gun to remove the 15/16 nuts. I hope it works on the larger nut on the diff. A 3lb mini sledge is set under the pit awaiting its turn. Surprisingly, my coach does not have or did not have much rust underneath. Hopefully I can pop out the tapered end as I do have a decent space to swing a mini sledge.

Next will be the tag axle bar. I do not see any bushings in it but I haven't explored it too far.