10-27-2024, 04:15 PM
It is not uncommon for bay floors to rust out.
I have replaced sections with 14G sheet metal. Be aware of underlying structure when cutting out with sawzall, grinder, or plasma.
I like POR 15 for the paint. Also check out a foam beak for using spray foam from the big box store to recoat the underside. https://foambeak.com/ A regular tip on the can will not spray upside down. I use a piece of 1/4 hose so I can hold the can upside down and the foam beak up against the horizontal surface.
I have replaced sections with 14G sheet metal. Be aware of underlying structure when cutting out with sawzall, grinder, or plasma.
I like POR 15 for the paint. Also check out a foam beak for using spray foam from the big box store to recoat the underside. https://foambeak.com/ A regular tip on the can will not spray upside down. I use a piece of 1/4 hose so I can hold the can upside down and the foam beak up against the horizontal surface.
Richard and Rhonda Entrekin
95 Newell, 390 Ex caretaker
99 Newell, 512 Ex caretaker
07 Prevost Marathon, 1025
Maverick Hybrid Toad
Inverness, FL (when we're home
)