[BusNit]

My Amana failed once the Magnum inverter pooped itself. Since the fridge was pretty old and had rust, I figured it was time to replace it. I went with a Fisher & Paykel unit. I think it was 33" wide. To get the height I needed it required two 3/4" plywood boards underneath and finished with aluminum angle to trim the plywood edges. Counter depth worked great but I added a couple 2x4's at the rear wall to keep the fridge from being pushed in too far. Since it was a bit narrower, I made filler strips painted to exact color of cabinets. Long screws through the feet of the fridge keep it secure. Wedged in another block of wood up top. No issues during our trips. Love the efficiency of the fridge with our solar. I never turn it off.