08-06-2021, 06:45 PM
I'm going to call around under the coach tomorrow. Mostly to keep familiarizing myself with what's down there. I bought a new 20 ton air/hydraulic bottle Jack and 2 sets of 22 ton Jack stands.
In the past I have driven up on some 2x12 ramps that I made and cribbed using wood. I would like to use the jack and the stands so that I am familiar with the process when traveling. I'll still carry some wood for cribbing but the ramps are to big to haul around.
From all the posts that I have researched, I think I have a pretty good feel on where to jack the rear end up to get the jack stands positioned where I normally would place the cribbing. However, I'm not to sure about the front end.
All advice appreciated.
In the past I have driven up on some 2x12 ramps that I made and cribbed using wood. I would like to use the jack and the stands so that I am familiar with the process when traveling. I'll still carry some wood for cribbing but the ramps are to big to haul around.
From all the posts that I have researched, I think I have a pretty good feel on where to jack the rear end up to get the jack stands positioned where I normally would place the cribbing. However, I'm not to sure about the front end.
All advice appreciated.
Tony and Cindy Frazier
1992, #300
2023 Ford Broncos Badlands Toad
Columbia, SC