Posts: 532
Threads: 67
Joined: Jun 2022
What is the purpose of the "Ultra High" switch on the Thomas compressor select (Valid) panel?
Jim
2014 Newell Coach 1482 Mid Entry 45'8" Valid Slides and Valid Levelling
Posts: 69
Threads: 7
Joined: Jan 2021
According to the sales brochure, there is a 130-135 psi pressure setting for tire inflation. Honestly, I've never used that switch since Newell provides an air doubler at the air chuck/hose reel in the rear of the coach. Does your Ultra High switch make any difference?
I also noticed the low hours on your hour meter. You've been diligent in your leak testing and very successful in eliminating them. I've got over 900 hours between my two compressors, and I have shop air too. Still chasing leaks and now sit at about 40 minutes between compressor cycles when parked and away from shop air.
Rob
2016 Newell #1536
(This post was last modified: 02-10-2025, 08:09 AM by
RobSC.)
Posts: 532
Threads: 67
Joined: Jun 2022
Aha! That's good to know. The left hour meter quit a couple of years ago & I replaced it a week ago, it is for the Jun-Air. I need it working to keep track of oil change times for the Jun-Air. The right hour meter for the right side Thomas compressor is probably accurate. I'll use the Jun-Air when occupying the coach & the Thomas when it's parked. The compressor cycles once every couple of days when not occupied.
Jim
2014 Newell Coach 1482 Mid Entry 45'8" Valid Slides and Valid Levelling
Posts: 1,145
Threads: 153
Joined: Sep 2021
Jim, that is truly impressive on air consumption. My hats off to you
--Simon
1993 8v92TA #312