12-21-2024, 10:23 PM
Did a bit more homework- seems we have a model that uses the magnetic disc's in the skin of the slide to detect when the slide is retracted near the hwh locking pins. That's why there is only 1 limit switch under the bed. Nice rabbit hole but no help on getting power to the board.
I am about to just bypass the brain board for the rear slide, finish bypassing and removing the locking pins and hook the extend / retact 3 way switch directly to the correct relay on the logic board to apply power to the solenoids. Switching the key will still deinflate/ inflate the slides. Got to incorporate the limit switches down stream from to relay to the solenoids. Hopefully you all can read the draft drawing of the system!
Awesome to have another Newell buddy up north to work with! Message me your number and we will meet up sometime.
Jesse and Sara White
2001 Newell Coach # 582
I am about to just bypass the brain board for the rear slide, finish bypassing and removing the locking pins and hook the extend / retact 3 way switch directly to the correct relay on the logic board to apply power to the solenoids. Switching the key will still deinflate/ inflate the slides. Got to incorporate the limit switches down stream from to relay to the solenoids. Hopefully you all can read the draft drawing of the system!
Awesome to have another Newell buddy up north to work with! Message me your number and we will meet up sometime.
Jesse and Sara White
2001 Newell Coach # 582